Top 10 Power Tool Safety Rules

Off and on even the most veteran contractor needs notified once in awhile about the capacity of their tools and gadgets along with their safety.   What could start out as a small-scale job or a task that you have completed once again…can quickly become a great risk if you use power tools carelessly.  At Packs Hardware in Smithville our equipment supply and power tool area is stockpiled with the latest power drills, power sanders, power saws and more.  Convenient in all plains of power for the ordinary do it yourselfer, or the full-time professional contractor.

Power tools can be powered by many things; electricity, compressed air, hydraulics, belts, or chain drives. Knowing the power tools’ capabilities will keep you protected. Look below to see the 10 power tool safety tips to keep you protected:

1. Always use the tools within their design limitations. Be sure to study the guide before beginning with any tool, to establish that you are using it right.
2. Consistently verify that you have the proper shoes or boots, gloves, and eyewear for safety protection.
3. Confirm that cords aren’t a tripping hazard.
4. Check out for any damage on the cord or tools.
5. Keep the construction or project area clean and dry to bypass slipping and sliding while working.
6. Do not use aged electrical tools that are not double-insulated or have a 3-pronged cord that can be plugged into a grounded receptacle.
7. Do not exceed the constraints of the power tool.
8. Work using a ground fault circuit interrupter (GFCI) or an assured grounding program.
9. Do not use power tools in damp or wet conditions or weather unless they are sanctioned to be used around those kinds of circustances.
10. And ultimately, constantly and carefully disconnect the tool, by taking your time and carefully unplugging the cord by not yanking on it.

Some Extra Notes:

If you operate a power tool in a moist and wet area you might run the danger of getting electrically shocked. This might lead to injuries, burns, and more.

If your job site consists of being on a ladder or way up high, some kind of electrical shock, even a mini one can cause spills off the ladder or building. L

To help reduce this risk, take the time to make sure the electrical power tool has a three-wire cord with a ground plugged into a grounded receptacle, be double insulated, or powered by a low-voltage isolation transformer for further security.

 

Being protected and secure in your working or home environment is super important to us at Packs Hardware. We want you to complete the project and to be casualty free! Don’t forget tip #2 and that is being sure that you have the appropriate safety equipment for any project. Also, don’t forget to have the voltage extension cords in various sizes ready in your toolbox. Everyone of these things should be found in the tool and electrical aisle at your local Packs Hardware in Smithville. Visit us today!